Home Security Motion Detector

I have a new home for security motion sensor that I intend to install in my driveway. The detector is white / black, but I only have a standard outlet that I can get power. Is it possible to install it using my releasea

Just go buy one end of the plug at any walmart etc. ... Home Depot and put it on the son .. By terminating plug on something that light .. he dont really matter which side you sink the black or white plug end .. very easy to do .. Do not let one of them cheap little plug ends at 2.00 .. get a good Heavy duty more about 5.00 ..

Yes, you have the white conected to the common Silfer

I guess your OULET is outside. You can get an extension box and the pipe to where you want light. Wire, as it normally would (white on white, black on black) oultel Put in the extension box. Hope this helps.

To answer this you better give more detailed information.

The black wire is the power wire, white is neutral, and often there is a green ground wire. You might also consider adjusting the sensitivity of the detector to prevent fires being activated by stray cats and such.