Motion Sensor Bulb

You may think it is difficult to upgrade the lighting fixture as the light motion sensor which is located above the garage. In fact, it is not as difficult as you think. You can easily install it without uninstalling the current fixture you have. Motion sensor socket can be affixed to lighting garage between the fixture and the bulb. Also, motion sensor light can trigger the light to go at any time on the sensor for detecting the motion. It can provide security features that you can enjoy light motion garage without all the work. At that time, this article will give you some tips to guide you to install a motion sensor light garage.

First, you must remove the bulbs from the existing light fixture. Then you need to cover the top of the bulb with a lint-free bulbs and turn gently to the left. After that, you have to turn the bulbs to the left until you find it exits the fixture.

Second, you must insert the motion sensor light in your fixture. The bottom threaded light sensor application must be positioned on the device, then turn the light sensor to the right of way to screw it up. You need to continue to rotate the sensor clockwise until it can not be longer.

Third, the motion sensor light be installed on each bulb to get the best result.

Fourth, you need to screw a bulb into each motion sensor. Up to 100-watt bulbs can be safely used in this device. Simply use the lint-free cloth to grasp the bulb and turn the bulb into the sensor. You can do this by turning the bulb toward the right until you can be sure hat it does not turn away.

Finally, you should leave the light to turn on at all times. When the light motion sensor detects motion, you will find that the light can turn on automatically. Moreover, once it has designated for some time, you will find that the light may be extinguished automatically.